Bilstein 2Inch Lift Kit – BYD Shark 6

We are proud to introduce the newly developed Bilstein 2″ Lift Kit for the BYD Shark, now officially in production. Engineered to complement the Shark platform, this complete suspension upgrade delivers a measured 2-inch lift while maintaining the refinement and control expected from Bilstein’s globally respected suspension technology.

At the core of the system are Bilstein’s proven 46mm monotube B6 Off-Road shock absorbers, paired with purpose-designed 2” lift springs developed specifically for this application. This integrated solution has been tuned to provide a balanced increase in ride height without compromising on-road dynamics.

Key Benefits

• Increased ground clearance for improved off-road capability
• Enhanced stability and directional control
• Superior ride comfort and handling across sealed and unsealed surfaces
• Greater confidence under load and in varied terrain conditions

Important Information

This lift kit is supplied as a complete, matched system. Shock absorbers cannot be purchased separately from the springs. The lift springs have been specifically engineered to suit the Bilstein spring seat design, and OEM BYD springs are not compatible with the Bilstein shock absorbers.

Designed for customers seeking a premium suspension upgrade with genuine off-road capability and uncompromised on-road performance, the Bilstein 2″ Lift Kit sets a new benchmark for the BYD Shark platform.

Bilstein Lift Kit Warranty

Bilstein lift kits come with a 3 year / 60,000 Kilometer warranty.

Springs & Lift Heights

Regarding the below, when you order a lift kit from us, our suspension experts will contact you to confirm all details and requirements before processing your order. We do this to make sure you get the best service and the best lift kit for your 4WD. Don’t stress about the finer details as we will take care of it. However, we note the below so you can understand the complexity.

As springs are what lift your 4WD, to ensure you get the correct height increase (lift) it is paramount that we supply the correct springs for your 4WD’s constant loads and intended use. Although all lift kits specify a specific lift height in the title. As your 4WD has front and rear springs this means you will have a front lift height and a rear lift height. The spring rates we supply in this lift kit are determined by the weights you carry, a suspension height increase.

Keep in mind that both the front & rear springs work in conjunction with one another. If spring rate for either the front or rear is wrong, this could cause an uneven lift. Making the vehicle nose down or nose up which is not the outcome we want. So after purchasing when talking to our suspension experts, be certain to provide our team with as much info as possible in regards to the vehicles use and also constant loads.

To get the correct springs for your car, you must match your vehicles constant load/weight to the correct spring rates. For example, if you carry 250kgs you should get a spring that best matches that load.

We recommend you get all your constant load accessories sorted before you get a lift kit installed, this will ensure you have a level lift and the best ride from the get-go and wont require future spring changes. A ‘constant load’ is the accessories/gear that will be installed or in the vehicle 24/7.

You do not want to get a spring that is rated less than the load you carry at constant. If you do this, you will overload your spring and it will sag/fail. You can overload a spring by carrying too heavy of a load (front/rear) or by towing a boat caravan that adds extra weight to the tow ball. For example, if you have a 300kg rated rear spring but load your rear to 500kg, then your rear spring would fail and sag. The same applies to the front, with various engines and accessories having different weights such as alloy bull bar, steel bull bar, bumper bars, steel winch, synthetic winch, bash plates, tow hook, batteries, diesel engine, petrol engines, etc.

The flipside to the above, is that you do not want to get a spring that is rated too high for what you carry at constant. For example, you do not want to get a spring that is rated to 300kg if you only carry 100kg constantly. If you do this you will have a very stiff ride and it could lead to suspension failure such as shock top outs, coil spring trap issues and more.

If you are carrying any dynamic load, including extra load on the weekends, or tow anything. Then you will need an airbag kit to help. Airbag kits are designed specially not to carry weight but to help support your springs to handle any extra weight you may carry occasionally, like a boat, caravan, camper, trailer, or general load increase.

Again, please don’t stress too much about the above. As, after you order this lift kit, our suspension experts will contact you to make sure you get the right kit, by confirming all your vehicle details and requirements.

If you have any questions, before you make a purchase, please use our online chat or call us.

Order your Formula 4×4 Lift Kit today and experience the difference superior 4×4 suspension makes.